Water–Level values are measured by an oil free titanium reference pressure measuring cell which senses a hydrostatic pressure of the
water column by a pressure with a capacitive diagram and converts this value into an electrical signal.Then measuring values are stored in
data logger which is built into the body of the pressure probe.
The PSL-037 Water Level Recorder with GE-Druck–PDCR/1830 pressure probe is especially designed for the continuous recording of
ground water level , surface water level , waste water level and tank level.
In pipes and bore holes of small diameter ( 2’’ ).
In large depths ( max. 300 m , up to 600 m ).
Not exactly in vertical bore holes or pipes.
For water level measurements are not permanently in water carrying river beds.( wadis , storage basins , etc. )
Type
Pressure Sensor
Memory
256 Kbytes (Ring Memory) , EEProm
Memory Storage Mode
Circle Mode ( cyclic over writing old data )
Memory Storage Capacity
Storage capacity of data over approximately 15 years at a storage interval of 1 hour.
Storage of
Water level , real time and date , alarms , manual correction of data (observer) with time and date, observer records. During readout, the sampling process is not disturbed.
LCD Display
3-lines dot matrix LCD Display , each of 12 characters. Shows actual water level , date / time , Level alarms , storage memory , sampling interval , min. / max. Value , last change of battery , last readout , actual and setup parameters , error messages and measured values. 15 sec. Auto. shut off.
Keypad
3 keys. Built – in touch keypad for operation and setting via keypad
The sampling and logging intervals can be preset ( from 1 minute to 24 hours )
Alarm Signals
High water level alarm , Low Level alarm , rate alarm and battery alarms by SMS messages send to : 2 units pocket telephones and 2 units PC. ( numbers incoming alarms automatic call from measuring stations)
